dmesg - second test
Linux version 2.6.18-308.1.1.el5.synacor (tgoodwill@c5-build-x64.opal.synacor.com) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-46)) #1 SMP Mon Apr 16 23:52:58 EDT 2012
Command line: ro root=/dev/vg_root/lv_root
BIOS-provided physical RAM map:
BIOS-e820: 0000000000010000 - 000000000009d000 (usable)
BIOS-e820: 000000000009d000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000cffbcdc0 (usable)
BIOS-e820: 00000000cffbcdc0 - 00000000cffd0000 (ACPI data)
BIOS-e820: 00000000cffd0000 - 00000000d0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000830000000 (usable)
DMI 2.4 present.
DMI: IBM IBM eServer BladeCenter HS21 -[7995L6U]-/Server Blade, BIOS -[MJE129BUS-1.11]- 09/26/2008
ACPI: RSDP (v002 IBM ) @ 0x00000000000fdfd0
ACPI: XSDT (v001 IBM SERBLADE 0x00001001 IBM 0x45444f43) @ 0x00000000cffcff00
ACPI: FADT (v002 IBM SERBLADE 0x00001001 IBM 0x45444f43) @ 0x00000000cffcfe40
ACPI: MADT (v001 IBM SERBLADE 0x00001001 IBM 0x45444f43) @ 0x00000000cffcfd80
ACPI: MCFG (v001 IBM SERBLADE 0x00001001 IBM 0x45444f43) @ 0x00000000cffcfd40
ACPI: ERST (v001 IBM SERBLADE 0x00001001 IBM 0x45444f43) @ 0x00000000cffcbf00
ACPI: DSDT (v002 IBM SERBLADE 0x00001000 INTL 0x20060707) @ 0x0000000000000000
No NUMA configuration found
Faking a node at 0000000000000000-0000000830000000
Bootmem setup node 0 0000000000000000-0000000830000000
bootmap start 7d6000 pages 262
Memory for crash kernel (0x0 to 0x0) notwithin permissible range
disabling kdump
Setting up node 0 0-830000
On node 0 totalpages: 8269514
DMA zone: 2390 pages, LIFO batch:0
DMA32 zone: 833524 pages, LIFO batch:31
Normal zone: 7433600 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x588
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:15 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled)
Processor #6 6:15 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 6:15 APIC version 20
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled)
Processor #7 6:15 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 14, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x0d] address[0xfec80000] gsi_base[24])
IOAPIC[1]: apic_id 13, version 32, address 0xfec80000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to physical flat
Using ACPI (MADT) for SMP configuration information
Nosave address range: 000000000009d000 - 00000000000a0000
Nosave address range: 00000000000a0000 - 00000000000e0000
Nosave address range: 00000000000e0000 - 0000000000100000
Nosave address range: 00000000cffbc000 - 00000000cffbd000
Nosave address range: 00000000cffbd000 - 00000000cffd0000
Nosave address range: 00000000cffd0000 - 00000000d0000000
Nosave address range: 00000000d0000000 - 00000000e0000000
Nosave address range: 00000000e0000000 - 00000000f0000000
Nosave address range: 00000000f0000000 - 00000000fec00000
Nosave address range: 00000000fec00000 - 0000000100000000
Allocating PCI resources starting at d1000000 (gap: d0000000:10000000)
SMP: Allowing 4 CPUs, 0 hotplug CPUs
Built 1 zonelists. Total pages: 8269514
Kernel command line: ro root=/dev/vg_root/lv_root
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Checking aperture...
ACPI: DMAR not present
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing software IO TLB between 0x20b06000 - 0x24b06000
Memory: 32958876k/34340864k available (2616k kernel code, 594824k reserved, 1672k data, 224k init)
Calibrating delay loop (skipped), value calculated using timer frequency.. 6000.38 BogoMIPS (lpj=3000192)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
using mwait in idle threads.
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM1)
SMP alternatives: switching to UP code
ACPI: Core revision 20060707
Using local APIC timer interrupts.
Detected 20.834 MHz APIC timer.
SMP alternatives: switching to SMP code
Booting processor 1/4 APIC 0x6
Initializing CPU#1
Calibrating delay using timer specific routine.. 5999.38 BogoMIPS (lpj=2999692)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 3
CPU: Processor Core ID: 0
CPU1: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU 5160 @ 3.00GHz stepping 0b
SMP alternatives: switching to SMP code
Booting processor 2/4 APIC 0x1
Initializing CPU#2
Calibrating delay using timer specific routine.. 5999.46 BogoMIPS (lpj=2999730)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU2: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU 5160 @ 3.00GHz stepping 0b
SMP alternatives: switching to SMP code
Booting processor 3/4 APIC 0x7
Initializing CPU#3
Calibrating delay using timer specific routine.. 5999.39 BogoMIPS (lpj=2999699)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 3
CPU: Processor Core ID: 1
CPU3: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU 5160 @ 3.00GHz stepping 0b
Brought up 4 CPUs
CPU#0: NMI watchdog performance counter calibration - 269->289
CPU#1: NMI watchdog performance counter calibration - 60->80
CPU#2: NMI watchdog performance counter calibration - 60->80
CPU#3: NMI watchdog performance counter calibration - 60->80
NMI watchdog testing PASSED.
time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
time.c: Detected 3000.192 MHz processor.
sizeof(vma)=176 bytes
sizeof(page)=56 bytes
sizeof(inode)=560 bytes
sizeof(dentry)=216 bytes
sizeof(ext3inode)=760 bytes
sizeof(buffer_head)=96 bytes
sizeof(skbuff)=248 bytes
migration_cost=15,9177
checking if image is initramfs... it is
Freeing initrd memory: 3531k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
Warning: pci_mmcfg_init marking 256MB space uncacheable.
MCFG table requires 16MB uncacheable only. Try booting with acpi_mcfg_max_pci_bus_num=on
PCI: Using MMCONFIG at e0000000
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI7.PCIX._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI7.PCI9.PCIA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI7.PCI9.PCIB._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIF._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIS._PRT]
ACPI: PCI Interrupt Link [LP00] (IRQs *5)
ACPI: PCI Interrupt Link [LP01] (IRQs *7)
ACPI: PCI Interrupt Link [LP02] (IRQs *11)
ACPI: PCI Interrupt Link [LP03] (IRQs *7)
ACPI: Blank IRQ resource
ACPI: Resource is not an IRQ entry
ACPI: PCI Interrupt Link [LP04] (IRQs) *0, disabled.
ACPI: PCI Interrupt Link [LP05] (IRQs *7)
ACPI: PCI Interrupt Link [LP06] (IRQs *11)
ACPI: PCI Interrupt Link [LP07] (IRQs *7)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 11 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
ACPI: DMAR not present
PCI-GART: No AMD northbridge found.
pnp: 00:01: ioport range 0xc00-0xc1f has been reserved
pnp: 00:01: ioport range 0xc60-0xc67 has been reserved
pnp: 00:09: ioport range 0xc28-0xc28 has been reserved
pnp: 00:09: ioport range 0xc2c-0xc2c has been reserved
pnp: 00:0a: iomem range 0xe0000000-0xefffffff has been reserved
pnp: 00:0a: iomem range 0xfed1c000-0xfed1ffff has been reserved
pnp: 00:0a: iomem range 0xfe000000-0xfe01ffff has been reserved
pnp: 00:0a: iomem range 0xfe020000-0xfe6fffff has been reserved
PCI: Bridge: 0000:09:00.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:09:01.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:07:00.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:07:00.3
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:02.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:03.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:04.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:05.0
IO window: 5000-ffff
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:03:00.0
IO window: disabled.
MEM window: da000000-dcffffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:06.0
IO window: disabled.
MEM window: da000000-dcffffff
PREFETCH window: disabled.
PCI: Bridge: 0000:05:00.0
IO window: disabled.
MEM window: d7000000-d9ffffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:07.0
IO window: disabled.
MEM window: d7000000-d9ffffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.0
IO window: 4000-4fff
MEM window: dd000000-deffffff
PREFETCH window 0x00000000d1000000-0x00000000d11fffff
PCI: Bridge: 0000:00:1e.0
IO window: 3000-3fff
MEM window: f8000000-f8ffffff
PREFETCH window 0x00000000f0000000-0x00000000f7ffffff
PCI: Setting latency timer of device 0000:00:02.0 to 64
PCI: Setting latency timer of device 0000:07:00.0 to 64
PCI: Setting latency timer of device 0000:09:00.0 to 64
PCI: Setting latency timer of device 0000:09:01.0 to 64
PCI: Setting latency timer of device 0000:07:00.3 to 64
PCI: Setting latency timer of device 0000:00:03.0 to 64
PCI: Setting latency timer of device 0000:00:04.0 to 64
PCI: Setting latency timer of device 0000:00:05.0 to 64
PCI: Setting latency timer of device 0000:00:06.0 to 64
PCI: Setting latency timer of device 0000:03:00.0 to 64
PCI: Setting latency timer of device 0000:00:07.0 to 64
PCI: Setting latency timer of device 0000:05:00.0 to 64
GSI 16 sharing vector 0xA9 and IRQ 16
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1c.0 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
audit: initializing netlink socket (disabled)
type=2000 audit(1368964172.765:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
alg: No test for crc32c (crc32c-generic)
ksign: Installing public key data
Loading keyring
- Added public key F2955F6B2ADACD11
- User ID: CentOS (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:01:01.0
PCI: Setting latency timer of device 0000:00:02.0 to 64
PCI: Setting latency timer of device 0000:00:03.0 to 64
PCI: Setting latency timer of device 0000:00:04.0 to 64
PCI: Setting latency timer of device 0000:00:05.0 to 64
PCI: Setting latency timer of device 0000:00:06.0 to 64
PCI: Setting latency timer of device 0000:00:07.0 to 64
PCI: Setting latency timer of device 0000:00:1c.0 to 64
PCI: Setting latency timer of device 0000:07:00.0 to 64
PCI: Setting latency timer of device 0000:09:00.0 to 64
PCI: Setting latency timer of device 0000:09:01.0 to 64
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI: Processor [CPU2] (supports 8 throttling states)
ACPI: Processor [CPU3] (supports 8 throttling states)
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide0: I/O resource 0x1F0-0x1F7 not free.
ide0: ports already in use, skipping probe
Probing IDE interface ide1...
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S4 S5)
Initalizing network drop monitor service
Freeing unused kernel memory: 224k freed
Write protecting the kernel read-only data: 530k
ksign: public key is 1334634449 seconds newer than the signature
GSI 17 sharing vector 0x42 and IRQ 17
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 66
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 66, io mem 0xf9000000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ksign: public key is 1334634449 seconds newer than the signature
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ksign: public key is 1334634449 seconds newer than the signature
USB Universal Host Controller Interface driver v3.0
GSI 18 sharing vector 0x4A and IRQ 18
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 18 (level, low) -> IRQ 74
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 74, io base 0x00002200
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
GSI 19 sharing vector 0x52 and IRQ 19
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 82
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 82, io base 0x00002600
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb 1-3: new high speed USB device using ehci_hcd and address 2
GSI 20 sharing vector 0x5A and IRQ 20
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 19 (level, low) -> IRQ 90
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 90, io base 0x00002800
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ksign: public key is 1334634449 seconds newer than the signature
usb 1-3: configuration #1 chosen from 1 choice
hub 1-3:1.0: USB hub found
hub 1-3:1.0: 2 ports detected
ksign: public key is 1334634449 seconds newer than the signature
ksign: public key is 1334634449 seconds newer than the signature
SCSI subsystem initialized
ksign: public key is 1334634449 seconds newer than the signature
ksign: public key is 1334634449 seconds newer than the signature
ksign: public key is 1334634449 seconds newer than the signature
Fusion MPT base driver 3.04.20rh
Copyright (c) 1999-2008 LSI Corporation
ksign: public key is 1334634449 seconds newer than the signature
ksign: public key is 1334634449 seconds newer than the signature
Fusion MPT SAS Host driver 3.04.20rh
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 169
mptbase: ioc0: Initiating bringup
usb 1-5: new high speed USB device using ehci_hcd and address 3
ioc0: LSISAS1064E B1: Capabilities={Initiator}
PCI: Setting latency timer of device 0000:02:00.0 to 64
usb 1-5: configuration #1 chosen from 1 choice
input: IBM IBM cKVM as /class/input/input0
input,hidraw0: USB HID v1.10 Keyboard [IBM IBM cKVM] on usb-0000:00:1d.7-5
input: IBM IBM cKVM as /class/input/input1
input,hidraw0: USB HID v1.10 Mouse [IBM IBM cKVM] on usb-0000:00:1d.7-5
scsi0 : ioc0: LSISAS1064E B1, FwRev=01160000h, Ports=1, MaxQ=286, IRQ=169
mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 1, phy 0, sas_addr 0x5000c5005411cd85
Vendor: SEAGATE Model: ST9300605SS Rev: 0002
Type: Direct-Access ANSI SCSI revision: 06
SCSI device sda: 585937500 512-byte hdwr sectors (300000 MB)
sda: Write Protect is off
sda: Mode Sense: d7 00 10 08
SCSI device sda: drive cache: write back w/ FUA
SCSI device sda: 585937500 512-byte hdwr sectors (300000 MB)
sda: Write Protect is off
sda: Mode Sense: d7 00 10 08
SCSI device sda: drive cache: write back w/ FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: Attached scsi disk sda
ksign: public key is 1334634449 seconds newer than the signature
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ksign: public key is 1334634449 seconds newer than the signature
libata version 3.00 loaded.
ksign: public key is 1334634449 seconds newer than the signature
ata_piix 0000:00:1f.2: version 2.12
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 23 (level, low) -> IRQ 66
ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi1 : ata_piix
scsi2 : ata_piix
ata1: SATA max UDMA/133 bmdma 0x2a00 irq 14
ata2: PATA max UDMA/100 bmdma 0x2a08 irq 15
ata2: port disabled. ignoring.
ksign: public key is 1334634449 seconds newer than the signature
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.11.6-ioctl (2011-02-18) initialised: dm-devel@redhat.com
ksign: public key is 1334634449 seconds newer than the signature
ksign: public key is 1334634449 seconds newer than the signature
ksign: public key is 1334634449 seconds newer than the signature
ksign: public key is 1334634449 seconds newer than the signature
ksign: public key is 1334634449 seconds newer than the signature
ksign: public key is 1334634449 seconds newer than the signature
ksign: public key is 1334634449 seconds newer than the signature
ksign: public key is 1334634449 seconds newer than the signature
device-mapper: dm-raid45: initialized v0.2594l
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
type=1404 audit(1368964204.681:2): selinux=0 auid=4294967295 ses=4294967295
ksign: public key is 1334634449 seconds newer than the signature
bnx2: Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.1.11 (July 20, 2011)
GSI 21 sharing vector 0x62 and IRQ 21
ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 98
ksign: public key is 1334634449 seconds newer than the signature
input: PC Speaker as /class/input/input2
ksign: public key is 1334634449 seconds newer than the signature
intel_rng: FWH not detected
ksign: public key is 1334634449 seconds newer than the signature
EDAC MC: Ver: 2.0.1 Apr 16 2012
ksign: public key is 1334634449 seconds newer than the signature
ksign: public key is 1334634449 seconds newer than the signature
EDAC MC0: Giving out device to i5000_edac.c I5000: DEV 0000:00:10.0
ksign: public key is 1334634449 seconds newer than the signature
ksign: public key is 1334634449 seconds newer than the signature
Floppy drive(s): fd0 is 1.44M
ksign: public key is 1334634449 seconds newer than the signature
eth0: Broadcom NetXtreme II BCM5708 1000Base-SX (B2) PCI-X 64-bit 133MHz found at mem da000000, IRQ 98, node addr 001a64591f3c
ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 19 (level, low) -> IRQ 90
eth1: Broadcom NetXtreme II BCM5708 1000Base-SX (B2) PCI-X 64-bit 133MHz found at mem d8000000, IRQ 90, node addr 001a64591f3e
ksign: public key is 1334634449 seconds newer than the signature
ksign: public key is 1334634449 seconds newer than the signature
ksign: public key is 1334634449 seconds newer than the signature
sd 0:0:0:0: Attached scsi generic sg0 type 0
floppy0: no floppy controllers found
work still pending
ksign: public key is 1334634449 seconds newer than the signature
Floppy drive(s): fd0 is 1.44M
floppy0: no floppy controllers found
work still pending
ksign: public key is 1334634449 seconds newer than the signature
ksign: public key is 1334634449 seconds newer than the signature
ksign: public key is 1334634449 seconds newer than the signature
lp: driver loaded but no devices found
ksign: public key is 1334634449 seconds newer than the signature
ksign: public key is 1334634449 seconds newer than the signature
ksign: public key is 1334634449 seconds newer than the signature
ksign: public key is 1334634449 seconds newer than the signature
ksign: public key is 1334634449 seconds newer than the signature
ACPI: Power Button (FF) [PWRF]
ksign: public key is 1334634449 seconds newer than the signature
ACPI: Mapper loaded
ksign: public key is 1334634449 seconds newer than the signature
dell-wmi: No known WMI GUID found
ksign: public key is 1334634449 seconds newer than the signature
ksign: public key is 1334634449 seconds newer than the signature
ksign: public key is 1334634449 seconds newer than the signature
ksign: public key is 1334634449 seconds newer than the signature
ksign: public key is 1334634449 seconds newer than the signature
ksign: public key is 1334634449 seconds newer than the signature
ksign: public key is 1334634449 seconds newer than the signature
ksign: public key is 1334634449 seconds newer than the signature
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
ksign: public key is 1334634449 seconds newer than the signature
ksign: public key is 1334634449 seconds newer than the signature
device-mapper: multipath: version 1.0.6 loaded
EXT3 FS on dm-0, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 2096472k swap on /dev/sda2. Priority:-1 extents:1 across:2096472k
ksign: public key is 1334634449 seconds newer than the signature
IA-32 Microcode Update Driver: v1.14a
microcode: CPU2 updated from revision 0xb7 to 0xbc, date = 10032010
microcode: CPU1 updated from revision 0xb7 to 0xbc, date = 10032010
microcode: CPU3 updated from revision 0xb7 to 0xbc, date = 10032010
microcode: CPU0 updated from revision 0xb7 to 0xbc, date = 10032010
ksign: public key is 1334634449 seconds newer than the signature
ksign: public key is 1334634449 seconds newer than the signature
ksign: public key is 1334634449 seconds newer than the signature
IPv6: Loaded, but administratively disabled, reboot required to enable
ksign: public key is 1334634449 seconds newer than the signature
Ethernet Channel Bonding Driver: v3.4.0-1 (October 7, 2008)
bonding: MII link monitoring set to 1000 ms
bonding: bond0: Adding slave eth0.
bonding: bond0: enslaving eth0 as a backup interface with a down link.
bnx2 0000:04:00.0: eth0: NIC SerDes Link is Up, 1000 Mbps full duplex
bonding: bond0: Adding slave eth1.
bonding: bond0: enslaving eth1 as a backup interface with a down link.
bnx2 0000:06:00.0: eth1: NIC SerDes Link is Up, 1000 Mbps full duplex
ksign: public key is 1334634449 seconds newer than the signature
802.1Q VLAN Support v1.8 Ben Greear
All bugs added by David S. Miller
8021q: adding VLAN 0 to HW filter on device bond0
bonding: bond0: link status definitely up for interface eth0.
bonding: bond0: making interface eth0 the new active one.
bonding: bond0: first active interface up!
bonding: bond0: link status definitely up for interface eth1.
ksign: public key is 1334634449 seconds newer than the signature
ksign: public key is 1334634449 seconds newer than the signature
ksign: public key is 1334634449 seconds newer than the signature
ksign: public key is 1334634449 seconds newer than the signature
ksign: public key is 1334634449 seconds newer than the signature
ksign: public key is 1334634449 seconds newer than the signature
ksign: public key is 1334634449 seconds newer than the signature
ksign: public key is 1334634449 seconds newer than the signature
Bluetooth: Core ver 2.10
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
ksign: public key is 1334634449 seconds newer than the signature
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
ksign: public key is 1334634449 seconds newer than the signature
Bluetooth: HIDP (Human Interface Emulation) ver 1.1
ksign: public key is 1334634449 seconds newer than the signature
ksign: public key is 1334634449 seconds newer than the signature
Fusion MPT misc device (ioctl) driver 3.04.20rh
mptctl: Registered with Fusion MPT base driver
mptctl: /dev/mptctl @ (major,minor=10,220)
ksign: public key is 1334634449 seconds newer than the signature
ksign: public key is 1334634449 seconds newer than the signature